Replacement Impeller
Log Home and Cabin Preservation Methods- Borate Wood Preservatives
Log Home and Cabin Borate Treatments - the options and how and when to use!
One of the most important ways to protect your investment, your home, is to use a wood preservative on your logs. There are only two times that you can effectively use these products on your logs. When the home is built, before it is stained, or after cob blasting a finish off of your logs, before you re-stain. The wood preservative must be applied to raw wood, so it can soak in and dry underneath the stain. This enables the borate to immediately go to work on any possible problem areas existing on the home or cabin, or provide the protection needed in the future if the need arises.
All wood faces the possibility of rot and insect infestation, even in dry climates. Fungi and insects actually consume the cells of dead wood, often causing severe structural damage that often requires log replacement-a costly repair. We use Penetreat to help protect your home from costly damage of rot and insect infestation. Penetreat is a borate based wood preservative. Borates are well known across the world for their protective qualities. Penetreat provides a protective "shell" coating which helps defend your home against dry, wet, and brown rot, as well as termites, house borers, powder post beetles, and carpenter ants, (to name a few).
Borate is not toxic to people and animals. It will not harm you or your pets. Borates do not affect the natural color or strength of wood. They are completely odorless, and are not corrosive to metal fasteners, nails or screws. When a "Penetreat" home is properly sealed against moisture, the borates can provide many years of effective protective.
Impel Rods are a highly concentrated solid form, water diffusible borate rod. They are ideal for both preventative treatments of high risk areas and remedial treatments in areas with existing decay. Because Impel Rods stop decay when properly used, there is no need to replace decay damaged, yet structurally sound logs! Decay prone and rot hot spot areas at greatest risk include: base logs, corner construction, exposed rafters or overhangs, and below windows, doors, and dormers.
Impel Rods depend on moisture to work. When moisture contents of wood reach levels suitable for decay attack, i.e. (around 25 percent) Impel Rods slowly dissolve and begin to diffuse throughout the moisture saturated wood. The preservative will migrate into the areas of highest moisture, which are at the highest risk from fungal decay. The diffused Impel Rod will adequately and effectively prevent the wood from rotting and decaying because it will not allow the fungus that causes rot to grow. When moisture levels drop below 25 percent, the preservative becomes dormant and provides a reserve, ready to reactivate should decay conducive conditions reoccur. We feel that Impel Rods are an essential part of the protection of your log home, and include them as part of our prevention and restoration system.
We hope this article has been helpful and look forward to giving you much more pertinent information concerning log homes and cabins and there unique issues.
About the Author
Jamie Fonder is the owner of Top-Coat Log Home Restoration LLC. We provide international services for log homes and all of their maintenance and restoration needs.
http://topcoatloghomerestoration.com/
1995 Mercury 40 HP 2 stroke 4 cyl Impeller replacement instructions.?
I want to replace my impeller. Please do not reply with buy a manual. I bought two. One owners manual that reads "take to dealer if flow is not good". and the 200 page factory manual has major tear down instructions for waterpump replacement , but nothing simple. This is supose to be an annual maintenance item. I also searched the forums and get the same old answer. Buy a manual. Some there there must be simple step by step instructions.
Ron - Thank you. I will print this out. I have diagrams in my 200 page manual.
1.Shift engine into foreward gear
2.tilt engine to full "up" position
3.remove 4 bolts (2 each side) from the gear housing
4. remove 1 bolt in front of trim tab
5. gear housing should drop down with the drive shaft attached
6. at the bottom of the drive shaft is a cover with 4 bolts undo bolts,lift cover exposing impellor.
hope this helps , can send you photocopy of exploded diagram ,cant email copy dont have scanner. email me if you want details
best of luck.
Jabsco FIP Pumps - Impeller Replacement
 |
 TETRA POND DYNAMAG 750 GPH REPLACEMENT IMPELLER  US $28.95
|
 JEBO 825 / 835 Replacement IMPELLER - Fast Shipping NEW US $14.99
|
 Mercury Quicksilver Impeller Replacement Kit 47-42038Q3 US $24.99
|
 Replacement impeller for all Kestrel Meters - PN# 0801 US $22.50
|
 Fluval 404 OLD STYLE Replacement Impeller A-20170 20170 US $12.95
|
 Jabsco impeller # 920-0001 replacement for pumps boat US $18.71
|
 Marineland Maxi Jet 1200 Replacement Impeller US $11.95
|
 TETRA POND DYNAMAG 500 GPH REPLACEMENT IMPELLER US $13.90
|
 Marineland Maxi Jet 600 Replacement Impeller US $9.95
|
 Koralia impeller #2 New Hydor Koralia replacement part US $5.95
|
 Replacement POWERDYNE BD-11A impeller, stock, OEM US $295.00
|
 TETRA WHISPER FILTER IMPELLER UNIT 60 /3/ 4 REPLACEMENT US $13.99
|
 Prizm Pro/Berlin Turbo Replacement Impeller Red Sea US $25.95
|
 Prizm Pro/Berlin Turbo Replacement Impeller Red Sea US $25.95
|
 TETRA WHISPER FILTER 1/2 IMPELLER UNIT REPLACEMENT US $13.99
|
 Replacement impeller shaft POWERDYNE BD-11A BD10 BD-600 US $245.00
|
 QUICKSILVER IMPELLER REPLACEMENT KIT PART #47-89983Q 1 US $39.99
|
 Replacement Impeller assembly for Rio 1100 Pump US $12.95
|
 Rio Pump Shaft Impeller Replacement Taam 1700-2500 US $4.50
|
 PondMaster 700 Pump Replacement Impeller US $17.77
|
 JEBO 828 / 838 Replacement IMPELLER - Fast Shipping NEW US $14.75
|
 Eheim Replacement Impeller for Model 1048, 3148 Pumps US $13.99
|
 Fluval Replacement Impeller Cover 3/404 & 3/405 Filters US $10.95
|
 Little Giant 555706 SRK-360-2 Impeller Replacement K US $17.53
|
 Taam Rio 1700 Replacement Impeller w/ Shaft US $16.99
|
 Two Otto PH1200 Powerheads with 1 replacement impeller. US $39.95
|
 SEIO 1500 Pump Replacement Impeller Assembly TAAM US $29.95
|
 Replacement Impeller assembly for TAAM Rio 2100 pump US $15.95
|
 JABSCO 6056-0003 MARINE IMPELLER REPLACEMENT WITH SHAFT US $54.95
|
 Hydor Koralia impeller #3 New replacement part US $5.95
|
 EcoPlus Pump Replacement Impeller - 1056 gph US $30.95
|
 EcoPlus Pump Replacement Impeller - 1267 gph US $32.95
|
 EcoPlus Pump Replacement Impeller - 1584 gph US $38.95
|
 EcoPlus Pump Replacement Impeller - 2245 gph US $89.95
|
 EcoPlus Pump Replacement Impeller - 3170 gph US $99.95
|
 ASM Sedra 9000 Pump Replacement Needle Wheel Impeller US $54.99
|
 Taam Rio+ 2100 Replacement Impeller w/ Shaft US $19.99
|
 Prizm Skimmer Turbojet Replacement Impeller Red Sea US $14.95
|
 Replacement Impeller Assembly 00.48.016 Duetto DJ100 US $8.95
|
 SEIO 1100 Pump Replacement Impeller Assembly TAAM US $26.95
|
 PONDMASTER MAG 12A PUMP REPLACEMENT IMPELLER DANNER US $24.95
|
 JABSCO 836-0003 MARINE IMPELLER REPLACEMENT (09-819B) US $33.95
|
 JABSCO 6056-0003 REPLACEMENT IMPELLER NITRILE US $75.00
|
 SEA WATER PUMP IMPELLER KIT REPLACEMENT KIT 47-59362Q08 US $75.00
|
 Replacement Impeller assembly for Seio 1100 pump TAAM US $26.45
|
 Replacement Impeller assembly for Seio 820 pump TAAM US $21.45
|
 Replacement Impeller assembly for Seio 620 pump TAAM US $15.45
|
 Replacement Impeller assembly for Seio 1500 pump TAAM US $28.45
|
 TAAM RIO 600 Pump Replacement Impeller Assembly US $10.95
|
 ASM Replacement Impeller G-4XX, & G-6X (Sedra 15000) US $51.95
|
 ASM Replacement Impeller for G-3 and G-4 (Sedra 5000) US $41.95
|
 ASM Replacement Impeller G-4+, G-5 & G-6 (Sedra 9000) US $49.95
|
 ASM Replacement Impeller G-1X and G-2 (Sedra 3500) US $39.95
|
 ASM Replacement Impeller for Mini G (G-300) US $26.95
|
 Replacement Impeller assembly for Rio 3100 pump US $34.95
|
 Replacement Impeller assembly for Rio 2500 pump US $31.95
|
 Replacement Impeller assembly for Rio 1700 pump US $15.95
|
 Replacement Impeller assembly for Rio 1400 pump US $12.95
|
 Mercury Impeller Replacement Kit 60366T 1 US $34.00
|
 Wayne SPV500 Replacement Impeller 56392 US $10.99
|
| Powered by phpBay Pro |
|
|
Fluval Ceramic Shaft Assembly for Impellers With Straight Fan Blades 304 305 404 405 - Fluval A20066 $5.55 Fluval Ceramic Shaft Assembly for Impellers With Straight Fan Blades 304 305 404 405 - Fluval A20066.... |
|
|
Magnetic Impeller for Fluval 404 Canister Filters - New Style $6.99 This is the new style (straight, white propeller.... |
|
|
Impeller Assembly for Aqua Clear 70 and 300 Filters $9.79 The Impeller is the only moving part of the Aqua Clear filter. With proper maintenance it will rarely need to be replaced. The Aqua Clear 70 replacement impeller is a white, 6 blade assembly with a magnet.... |
|
|
Overdrive Large-Volume Cell Culture System Impeller Assembly, 45 L - Replacement Parts $1,667.03 Designed for suspension or microcarrier cell culture. Complete system comes with either a 19 or 45L vessel, impeller assembly, and top drive motor. The large, adjustable-height PTFE paddle of the impeller assembly works together with the dimple in the bottom of the flask to provide gentle, even distribution and reduce dead ares. The impeller's wetted components include 316L Stainless Steel, virgin... |
|
|
Superior Pump 53X Replacement Impeller for BP20X $27.99 ... |
|
|
Little Giant SRK-360-2 Impeller replacement kit for 360 series self-priming transfer pumps (555706) $19.85 Little Giant SRK-360-2 Impeller replacement kit for 360 series self-priming transfer pumps (555706)Impeller Replacement Kit For 360 Series Self-Priming Transfer PumpsImpeller replacement kit for 360 series self-priming transfer pumps. Kit includes two Buna-N impellers and two cover gaskets.... |
|
|
Replacement part For Toro Lawn mower # 73-1330 IMPELLER, 850 BLOWER $16.49 Replacement part # 73-1330 IMPELLER, 850 BLOWER for Toro Lawn mower / Tractors / String Trimmers... |
|
|
NIELSEN-KELLERMAN CO - KESTREL REPLACEMENT IMPELLER (0801) (0801) $13.95 KESTREL REPLACEMENT IMPELLER... |
|
|
Impeller Assembly, Complete: X, $144.40 Impeller Assembly Complete: X... |
|
|
DF 69 Impeller Unit/Intake Ring $28.76 ... |